Liteon 74C firmware irasymo problema

Kaip ir esu naujokas,flasinimo ir dvd key istraukimo is liteon draivo bet siandien viskas pavyko is pirmo karto ....tik vat irasant nauja firmware naudojant jungle flasher ismeta sita klaida:

DRIVER RETURNED INVALID STATUS or INVALID STATUS 0x80.

Vienu bandymu buvo pradeja rasyti ,bet pakibo programa (not responding)

Gal cia kad naudoju onboard sata jungti?

Gal kas gali padeti sita tema?

o tau pereina dvd romas i vendor mode?

  2011-04-07 16:33, 'manfreds' parašė:

o tau pereina dvd romas i vendor mode?

Skaityti daugiau  

taip pereina ....

viskas ok iki kol paspaudziu ,write,,

tada ir ismeta ta klaida:

INVALID STATUS 0x80.

  2011-04-07 16:20, 'Akysa' parašė:

Kaip ir esu naujokas,flasinimo ir dvd key istraukimo is liteon draivo bet siandien viskas pavyko is pirmo karto ....tik vat irasant nauja firmware naudojant jungle flasher ismeta sita klaida:

DRIVER RETURNED INVALID STATUS or INVALID STATUS 0x80.

Vienu bandymu buvo pradeja rasyti ,bet pakibo programa (not responding)

Gal cia kad naudoju onboard sata jungti?

Gal kas gali padeti sita tema?

Skaityti daugiau  

daryk intro vendor tada turi per 1sec isjungt ijungt dvd roma tada pereisi i status 0x72 ir viskas rasai CFW ir zaidi sau i sveikata

  2011-04-07 16:43, 'snaiperr' parašė:

daryk intro vendor tada turi per 1sec isjungt ijungt dvd roma tada pereisi i status 0x72 ir viskas rasai CFW ir zaidi sau i sveikata

Skaityti daugiau  

viskas buvo bandyta 20 ar net 30kartu

pereina i status 0x72

viskas ciki tik paspaudus write

ismeta ta klaida ...

  2011-04-07 16:47, 'Akysa' parašė:

viskas buvo bandyta 20 ar net 30kartu

pereina i status 0x72

viskas ciki tik paspaudus write

ismeta ta klaida ...

Skaityti daugiau  

ikelk JF loga pasiziuresim kas ten blogai

Pas tave SATA driveriai irasyti tie kuriuos jf siulo? Jei ne tai tutoriale surask kaip juos susitvarkyt isirasius.

  2011-04-07 17:52, 'mantosis' parašė:

Pas tave SATA driveriai irasyti tie kuriuos jf siulo? Jei ne tai tutoriale surask kaip juos susitvarkyt isirasius.

Skaityti daugiau  

Removing VIA drivers (Windows XP/Vista/Win 7)

NOT TO BE DONE IF YOUR MAIN HARD DRIVE IS ON VIA SATA CARD or IF YOUR

VIA CHIPSET IS ONBOARD(i.e. NOT A PCI CARD)

nes pas mane on board SATA ir hardas pajungtas per juos...

ir kontroleris ne VIA 6421 RAID o kazkoks VIA 87......neatsimenu tiksliai

  2011-04-07 18:40, 'Akysa' parašė:

Man galioja sitas:

Removing VIA drivers (Windows XP/Vista/Win 7)

NOT TO BE DONE IF YOUR MAIN HARD DRIVE IS ON VIA SATA CARD or IF YOUR

VIA CHIPSET IS ONBOARD(i.e. NOT A PCI CARD)

nes pas mane on board SATA ir hardas pajungtas per juos...

ir kontroleris ne VIA 6421 RAID o kazkoks VIA 87......neatsimenu tiksliai

Skaityti daugiau  

JF loga butu galima pamatyti ar ne?

  2011-04-07 19:55, 'snaiperr' parašė:

JF loga butu galima pamatyti ar ne?

Skaityti daugiau  

imesiu uz 2h....

aciu kad nori padeti..

  2011-04-08 10:15, 'Akysa' parašė:

vakar buvau jau ne namuose tai logo negalejau imesti

imesiu uz 2h....

aciu kad nori padeti..

Skaityti daugiau  

Stai JF logas....

JungleFlasher 0.1.79 Beta (208)

Session Started Fri Apr 08 16:11:53 2011

This is a 32 bit process running on 2 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 2 I/O Ports.

Found 1 Com Ports.

Found 6 windows drives A: C: D: E: F: G:

Found 3 CD/DVD drives E: F: G:

Loading firmware file D:\Programos\Xbox 360\mano xbox raktas\Dummy.bin

MD5 hash: 03d3f3202538ace700107780664c218b

Inquiry string found

Identify string found

Drive key @ 0xA030 7C8C3CA5EA49F3BB661863B06C0D25A0

Firmware Osig: [PLDS DG-16D2S 7485]

Firmware is: DVDKey32 extract

Auto-Loading firmware file D:\Programos\Xbox 360\JungleFlasher v0.1.79 Beta (208)\firmware\LTPlus-748v1.1.bin

MD5 hash: 53786fac70e9c6b895b2e99144c7fb6d

Genuine LT plus v1.1

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS DG-16D2S 7485]

Firmware is: LT-Plus 1.1

Spoofing Target

DVD Key copied to target

Inquiry string copied to Target

Identify string copied to Target

Serial data copied from Source to Target

No Calibration data in source

Spoofing Target

DVD Key already matches

ID strings already match

Serial data already matches

No Calibration data in source

Target f/w saved as: Lite_CFW.bin

Lite-On-Erase NOT sent

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

....................

Device Intro failed!

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

.....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

CIA PASPAUDUS Write :

Getting Status from port 0xE880

Invalid Status 0x80

  2011-04-08 13:18, 'Akysa' parašė:

vakar buvau jau ne namuose tai logo negalejau imesti

imesiu uz 2h....

aciu kad nori padeti..

Stai JF logas....

JungleFlasher 0.1.79 Beta (208)

Session Started Fri Apr 08 16:11:53 2011

This is a 32 bit process running on 2 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 2 I/O Ports.

Found 1 Com Ports.

Found 6 windows drives A: C: D: E: F: G:

Found 3 CD/DVD drives E: F: G:

Loading firmware file D:\Programos\Xbox 360\mano xbox raktas\Dummy.bin

MD5 hash: 03d3f3202538ace700107780664c218b

Inquiry string found

Identify string found

Drive key @ 0xA030 7C8C3CA5EA49F3BB661863B06C0D25A0

Firmware Osig: [PLDS DG-16D2S 7485]

Firmware is: DVDKey32 extract

Auto-Loading firmware file D:\Programos\Xbox 360\JungleFlasher v0.1.79 Beta (208)\firmware\LTPlus-748v1.1.bin

MD5 hash: 53786fac70e9c6b895b2e99144c7fb6d

Genuine LT plus v1.1

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS DG-16D2S 7485]

Firmware is: LT-Plus 1.1

Spoofing Target

DVD Key copied to target

Inquiry string copied to Target

Identify string copied to Target

Serial data copied from Source to Target

No Calibration data in source

Spoofing Target

DVD Key already matches

ID strings already match

Serial data already matches

No Calibration data in source

Target f/w saved as: Lite_CFW.bin

Lite-On-Erase NOT sent

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

....................

Device Intro failed!

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

.....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

CIA PASPAUDUS Write :

Getting Status from port 0xE880

Invalid Status 0x80

Skaityti daugiau  

DAR VIENAS LOGAS IR TAIP GALIMA DARYTI IKI UZSIPI>>>>>>>>>>

JungleFlasher 0.1.79 Beta (208)

Session Started Fri Apr 08 16:21:01 2011

This is a 32 bit process running on 2 x 32 bit CPUs

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 2 I/O Ports.

Found 1 Com Ports.

Found 6 windows drives A: C: D: E: F: G:

Found 3 CD/DVD drives E: F: G:

Loading firmware file D:\Programos\Xbox 360\mano xbox raktas\Dummy.bin

MD5 hash: 03d3f3202538ace700107780664c218b

Inquiry string found

Identify string found

Drive key @ 0xA030 7C8C3CA5EA49F3BB661863B06C0D25A0

Firmware Osig: [PLDS DG-16D2S 7485]

Firmware is: DVDKey32 extract

Auto-Loading firmware file D:\Programos\Xbox 360\JungleFlasher v0.1.79 Beta (208)\firmware\LTPlus-748v1.1.bin

MD5 hash: 53786fac70e9c6b895b2e99144c7fb6d

Genuine LT plus v1.1

Drive key @ n/a 77777777777777777777777777777777

Firmware Osig: [PLDS DG-16D2S 7485]

Firmware is: LT-Plus 1.1

Spoofing Target

DVD Key copied to target

Inquiry string copied to Target

Identify string copied to Target

Serial data copied from Source to Target

No Calibration data in source

Spoofing Target

DVD Key already matches

ID strings already match

Serial data already matches

No Calibration data in source

Target f/w saved as: Lite_CFW.bin

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0x2A

Device ID: 0x2A

Flash Name: Unknown type

Flash Size: n/a

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

.........

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Getting Status from port 0xE880

Invalid Status 0x80

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

.......

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Getting Status from port 0xE880

Invalid Status 0x80

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0x2A

Device ID: 0x2A

Flash Name: Unknown type

Flash Size: n/a

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

........

Serial flash found with Status 0x72

Manufacturer ID: 0x0

Device ID: 0x0

Flash Name: Unknown type

Flash Size: n/a

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

.....

Serial flash found with Status 0x72

Manufacturer ID: 0x1

Device ID: 0x1

Flash Name: Unknown type

Flash Size: n/a

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Getting Status from port 0xE880

Invalid Status 0x80

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Getting Status from port 0xE880

Invalid Status 0x80

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

........

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Getting Status from port 0xE880

Invalid Status 0x80

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

........

Serial flash found with Status 0x72

Manufacturer ID: 0x2E

Device ID: 0x2E

Flash Name: Unknown type

Flash Size: n/a

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

.....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Getting Status from port 0xE880

Invalid Status 0x80

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

......

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0x2A

Device ID: 0x2A

Flash Name: Unknown type

Flash Size: n/a

Unknown flash type Write aborted !

Sending Lite-On-Erase request to port 0xE880

..............

Drive returned Status 0x80

........

Serial flash found with Status 0x72

Manufacturer ID: 0x1

Device ID: 0x1

Flash Name: Unknown type

Flash Size: n/a

Sending Vendor Intro to port 0xE880

Status 0x80

Re-sending Vendor Intro:

.....

Serial flash found with Status 0x72

Sending Device ID request to port 0xE880

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Getting Status from port 0xE880

Invalid Status 0x80

na aisku kazkas negerai su sata korta jin kazko atmeta pamegink issitrinti satos driverius panasiai kaip ir via dirverius reikia istrinti ir tada megink viska daryt ant to pacio porto jei ir tas nepades tada eini pas drauga ir megini viska ta pati atlikti ant jo kompo

Turėjau naujausią liteon su 9345 fw. Bet esme ta buvo, kad kai nukirto kazkas jo takelius, pažeidė perejima i kita plokstes puse, ten kur reikia nukirsti takelius aplink vieną tašką, kad PROBE 2 paimtų visą fw. Ilitavau adatos galiuką į ta perejimo tašką ir viskas susitaisė. Bet iškart sakau reikia geru litavimo igudžių kitaip nieko nebus. O pas tave liteonas buvo pjaustytas, nes is LT versijos norint paimt rakta reikdavo pjaustyt kol nebuvo PROBE 3. Jei pas jus nepjaustytas tada turbūt kažkur kitur bėda yra.

Pas mane niekas nepjaustyta..Rakta issitraukiau su ,,home made probe''.

pala o pas tave dabar veikia dvd romas?

  2011-04-10 08:27, 'snaiperr' parašė:

pala o pas tave dabar veikia dvd romas?

Skaityti daugiau  

taip ,veikia