GMR

Team Xecuter pristato RGH 2.0 ir DemoN Dual Nand

Rekomenduojami pranešimai

The newly formed RGH Development Team at Xecuter HQ are proud to announce that all Phat consoles have now been defeated and are totally glitch-able without having a previous NAND dump or CPU KEY (the same applies to Slim Trinity that have been updated to 14717/14719) !

 

Codenamed RGH 2.0, new features introduced:

* Hack now works on new CB's (14717/14719 update)

* Hack now works with all Refurbished Split CB's (4577, 5772, 6752)

- Zephyr CB 4577, 4575

- Falcon/Opus CB 5772, 5773

- Jasper CB 6752, 6753

- Trinity (Slim) CB 9230

 

To confirm, we can now glitch Phats with any kernel and any bootloader. As soon as you have your CPU KEY, and you are using an Xecuter DemoN you will ALWAYS be able to switch to a fully hacked NAND and it can never be stopped no matter what update you apply and no matter which efuses are blown !

 

We will be helping the J-Runner team to implement all of the new code which will allow you to build a patched ecc for any Phat NAND / Kernel / Bootloader.

 

The Xenon RGH hack will also be released however the quality of glitching seems to be as poor as the infamous Zephyr. No doubt once its out there users can tweak away at it and get some better results, the feeling here is that it's time wasted at the moment when we should be working on Corona. Currently it's a "repair" method at best to rescue DVD keys.

 

This is a new style of RGH hack (hence RGH 2.0) and there will be a new JED file, changes to the CoolRunner design, changes to the QSB's and possibly new install methods (we'll also show you how to change your older version TX CoolRunner to be compatible with the new hack, and initial tests have shown that other cheaper versions of RGH hardware will not work at all).

 

Work on fine tuning the hack is currently ongoing to make it as solid as possible, however we hope to have everything ready asap.

 

Members of our team are also working hard on the new Slim Corona model and can tell you that great progress has made made there too. We'll just say that we feel bad for anyone who paid good money for any glitch mod that was advertised as being "Corona Ready".

 

Stay tuned for more news :)

 

Thanks to Tiros & GliGli for their initial work on the RGH hack. Without them none of this would have been possible.

 

 

The Xecuter DemoN is the most advanced Xbox 360 NAND device ever created.

Phat Version (left) - Slim Version (right)

Xecuter DemoN Xecuter DemoN

 

NuotraukaNuotrauka

 

Giving you the ability to have dual NAND's is nothing new to the scene thanks to Team Cygnos and their dual NAND device for older generation Phat JTAG models. However since the advent of the Reset Glitch Hack (RGH) scene, there has been an insurgence of homebrew activity on all the newer models of Xbox 360, including all of the Phat consoles that could no longer be JTAG'd, giving a need for multiple NAND's yet again so you can run your own custom kernels and linux apps on all the latest models including the new Xbox 360 S (or Slim as its known).

 

Picking up where Cygnos left off, Xecuter has taken the Dual NAND design and basically fixed every known bug and flaw that existed with the Cygnos, improved features, increased r/w speeds, redesigned the layout and install methods, added new functions and basically took the dual NAND concept to the next level.

 

The built-in NAND R/W hardware is a stand out feature. Completely bypassing the need for any external device such as the Xecuter NAND-X or any other SPI tool, the DemoN has a USB port which offers a completely pass-thru solution giving you direct access to the Demon & On-board NAND's – and with the turbo mode, you can now achieve NAND r/w speeds that have never been seen before on the Xbox.

 

Xecuter hasn't forgotten JTAG fans either, there are thousands upon thousands of users out there who run a perfectly functioning JTAG machine – many of them using the Xecuter JTAG QSB Install Kits that have become so popular over the last couple of years. Not only does the DemoN support all of the latest RGH devices such as the Xecuter CoolRunner – but we have also designed the DemoN to make sure that it doesn't affect any current JTAG installs – which is ideal for those who have the QSB kits installed and working perfectly – fitting the Demon does not require that they have to remove their functioning JTAG feature. The DemoN will also work with your currently installed RGH Device especially the TX CoolRunner and it's QSB install kits. Xecuter thinks of the customer experience first and foremost !

 

As always with Team Xecuter you can trust that we make the absolute best quality devices paying attention to the tiniest details and making sure that the end user is completely confident in a premium product backed by our famous warranty.

 

Xecuter is the brand you can trust, don't accept poor imitations.

 

Main Features:

* NextGen Dual NAND Device

* Easy Switch Between Stock Onboard NAND and Custom NAND

* Easy QSB Solution (Quick Solder Board)

* Easy Wire Install Option Also Available

* Both Phat & Slim Versions

* Support 16MB & 256MB / 512MB (Big Block) NAND Versions

* Original Brand NAND to Match Stock For Security & Compatibility

* Built-In USB NAND Read/Write Hardware (NAND-X / Other SPI Hardware Not Required)

* Turbo NAND R/W Mode (16MB Dump less than 20 seconds)

* TX CoolRunner Options

* Supports Phat JTAG Installs (Inc All TX QSB JTAG Kits)

* Supports Phat & Slim RGH Installs (Inc TX CoolRunner QSB Kits)

* No Lifting of CE Pin on Both Phat & Slim

* No Trace Cuts on Both Phat & Slim

* Custom Software & Drivers

* 100% J-Runner Support

* Proven Xecuter Build Quality & Warranty

* More Premium Features Will Be Announced Very Soon……

 

Dev versions of the DemoN will be shipped to all of Xecuter's newly created RGH Development Team as well as members of Freeboot, FreestyleDash and other prominent developers in order to enhance the abilities of the DemoN and to make sure it is as fine tuned as possible by the very guys who bring you all of your homebrew goodness.

 

Stay tuned for more DemoN updates!

 

Redagavo GMR

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

Viena is geriausiu naujienu tai ,kad.

Built-In USB NAND Read/Write Hardware (NAND-X / Other SPI Hardware Not Required)

Redagavo Starscream

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

Automatiskai kaina turetu buti zyyymiai didesne del to. Speju bus minimum 30-40 GBP

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

Galetu kaip nors padaryt, Supercheap buda - 40-50lt.... Kad ir be jokiu cia dual nand ar dar kokiu sh...

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

jie kazka kalbejo apie atskirus non coolrunner integrated dual nand mikruskes, tipo suprastintas demonas. kad leis ir dabartiniam coolrunneriam nauja koda (turetu isleist visvien skirtumas nesikeicia glitchinimo tik tiek kad 2 nandas stoves.) taigi automatiskai zmogus gales rinktis ko nori ar demona detis ar cr.

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

live galesi losti su originaliais diskais, o persijunges i RGH galesi losti piratinius is HDD

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

viskas ok, jei jau RGH padarytas gali per usb atsinaujinti iki 14717 siuo metu. Turetu ir 14719 pasirodyti

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

Na ka, vel galima glichinti visus FATus

 

Team Xecuter RGH2.0 For CoolRunner Rev A and B

 

We were not quite ready to release this due to it's unstable boot times on older glitch hardware, but as our code was leaked from a team member AGAIN we had to release this due to another team stealing the code and claiming as their own work. They were even too lazy to change any of the patches to make it look like their own – they are 1:1 same as our original sources. Super lame. It seems some teams think this is the Wii or PlayStation scene and you can act like this. They don't even give credits to cOz for his SMC patcher – because they didn't even know that code was from him of course.

 

We don't want to get dragged down into bullshit scene politics – most of you won't care anyway, but a lot of guys work very hard on this stuff only to have it stolen with no effort and no credits is just sad. Anyway……

 

The Xecuter RGH Development Team are pleased to announce the official release of the RGH2.0 hack for all CoolRunner Rev A and Rev B dev boards. All Phat consoles have now been defeated and are totally glitch-able without having a previous NAND dump or CPU KEY (the same applies to Slim Trinity that have been updated to 14717/14719).

 

We have included all of the build.py and xebuild scripts for your convenience. Please give the correct credits if you use our work.

Xecuter RGH2.0 Features introduced:

 

Hack now works on new CB's (14717/14719 update)

Hack now works with all Refurbished Split CB's (4577, 5772, 6752)

Zephyr CB 4578, 4575, 4577

Falcon/Opus CB 5771, 5772, 5773

Jasper CB 6750, 6752, 6753

Trinity (Slim) CB 9188, 9230

 

To confirm, we can now glitch Phats with any kernel and any bootloader. As soon as you have your CPU KEY, and you are using an Xecuter DemoN you will ALWAYS be able to switch to a fully hacked NAND and it can never be stopped no matter what update you apply and no matter which efuses are blown !

Technical Info

 

In the slim boot chain the 2nd bootloader (CB) is split into two pieces. The first part simply starts encryption and loads the second part, which does fuse checks and all the things that the old single CB did. By glitching the first part (CBA), we take control of the system before the fuse checks occur and can patch them out. The slim bootchain has always used this layout and some groups have even tried bringing the slim CBA to phat and using the old single phat (RGH1) CB as c**. Glitching this way will work if you set it up right, but there are actually phat xboxes that already have their own split CB boot chain which were mostly ones that had been refurbished (CB 5772, 6752, 4577).

 

What we have done is simultaneously find glitch timings for these refurbs, dump their cpu_key, decrypt the boot chain, and port it to run on every other phat! This means that on phats we can now glitch before the fuse check and thus have an unpatchable hack just like trinity!

New Xecuter CoolRunner v2 Hardware

 

There have been many obstacles to cross with this because CBA glitching does not behave quite the same as CB glitching. The Coolrunner revisions A&B will glitch for RGH2.0 but results will vary and with some, boot times can be worse than trinity and with others they may be instant. These boot times are unacceptable and this is why we have spent the last few weeks designing a new glitch chip that will solve all these problems and will even help with trinity and corona boot times

New Xecuter CoolRunner v2 Upcoming Features:

 

Corona support

Much better glitch times for RGH1 and RGH2

All-in-One code for all versions

Demon integration

Level shifted POST output

…and much more

 

Development is almost complete – find an image of the CR v2 dev unit in this release pack.

Building an Image

 

With RGH2, a cpu_key is necessary for building the NAND image. The reason for this is because cpu_key encryption starts at CB, and in RGH1 there was only one CB which meant that CD was encrypted with cpu_key but CB could be "zero paired" which meant that the cpu_key would not be applied. When split-CB was added, they started the encryption at CBA and removed the zero pairing option, which means that cpukey encryption on c** is mandatory. Because of a vulnerability in the way they use RC4, if you have a stock NAND image that already has a c** encrypted on it, we can derive the keystream used in that image because we know what the c** looks like decrypted (we have already decrypted that version before). Because of this, we can embed the older vulnerable c** into the NAND image using the keystream.

 

Bottom line is, after the 14717 update they turned all phats into a split CB boot chain but using unglitchable bootloaders. We can still glitch these boxes even when we don't know the cpu_key because we can use the "XOR hack" to embed the RGH2 bootloaders. For older images (pre-14717) we need the cpu_key to encrypt the new loaders because there is not a c** already in the image that we can derive a keystream from.

 

Once the cpu_key is retrieved, you can always build a NAND image for RGH2'ing your machine. You can flash back to stock, update, even burn all your fuses and you would still be able to run RGH2.

 

For building a xell image, read the readme in XECUTER_RGH2_Xell.

 

For an xebuild image (if you have your cpu_key already) browse to XECUTER_RGH2_Xebuild.

Instructions

 

First wire up your Xecuter CoolRunner according to the diagram provided. RGH2.0 Requires that you either already have your cpu_key or you are on dashboard 14717/14719. This means that if you do not have your cpu_key, you must run xell first to retrieve your fuses.

COOLRUNNER CPLD PROGRAMMING

 

The XSVF files are located in \xsvf folder. Start with the xsvf recommended below, however every xsvf should run on every motherboard, but one of them will work best for your setup.

 

Falcon/Opus: Program either TX_RGH2_B.xsvf, or TX_RGH2_C.xsvf

 

Jasper: Program either TX_RGH2_A.xsvf, or TX_RGH2_D.xsvf

 

Zephyr: Program either TX_RGH2_D.xsvf, or TX_RGH2_C.xsvf

 

Please enjoy this release and report any interesting tweaks you may find. Our forums at www.team-xecuter.com/forums offer excellent support and we would be glad to help and receive feedback from you.

 

CREDITS:

 

If you are going to use RGH2.0 please give credits to the Team Xecuter RGH development Team. Don't be lame and try to claim the work as your own.

 

Thanks to Tiros & GliGli for their original RGH work.

Thanks to cOz for his universal SMC patcher.

Thanks to all the Xecuter developers and official testers. You know who you are.

Thanks to Ubergeek for the diagram.

Thanks to the asshole who leaked our code for others to steal and claim as theirs. Super lame.

Dalintis šiuo pranešimu


Nuoroda į pranešimą
Dalintis kituose puslapiuose

Prisijunkite prie pokalbio

Jūs galite rašyti dabar, o registruotis vėliau. Jeigu turite paskyrą, prisijunkite dabar, kad rašytumėte iš savo paskyros.

Svečias
Parašykite atsakymą...

×   Įdėta kaip raiškusis tekstas.   Įdėti kaip grynąjį tekstą

  Only 75 emoji are allowed.

×   Nuorodos turinys įdėtas automatiškai.   Rodyti kaip įprastą nuorodą

×   Jūsų anksčiau įrašytas turinys buvo atkurtas.   Išvalyti redaktorių

×   You cannot paste images directly. Upload or insert images from URL.


  • Naujausios temos

  • Naujausi pranešimai

    • Hochzeitsmoderatorin
    • This is a easy guide for beginners in RS3. This guide will be explaining how to flip and earn Cheap RuneScape 3 Item from the Grand Exchange in RuneScape 3. Here is a comprehensive guide for beginners on items in RuneScape 3 (RS3): What Are Items? Items: Items are objects that players can use, wear, or equip in the game. Types of Items: Items can be categorized into several types, including: Equipment: Items that can be equipped to enhance combat or skill performance. Consumables: Items that can be consumed to restore health, boost skills, or provide other benefits. Miscellaneous: Items that do not fit into other categories, such as decorative items or items used for specific activities. How to Obtain Items Dropping from Monsters: Many items can be obtained by killing monsters. Looting from Chests: Some items can be found in chests or containers. Buying from Other Players: Players can buy items from other players on the Grand Exchange. Crafting: Players can craft items using resources and skills. How to Use Items Equipping: Players can equip items to enhance their character's abilities. Consuming: Players can consume items to restore health or boost skills. Using: Players can use items for specific activities, such as fishing or mining. Tips for Beginners Start with Basic Equipment: Begin with basic equipment and upgrade as you progress. Focus on Essential Skills: Focus on essential skills like combat and skill training. Explore and Experiment: Explore the game and experiment with different items and activities. Join a Clan: Join a clan to participate in group activities and share knowledge. Items play a crucial role in RuneScape 3, and understanding how to obtain, use, and manage them is essential for success. This guide provides a comprehensive overview of items for beginners, covering their types, how to obtain them, and how to use them effectively. You can click rs2hot.com to getting some cheap RuneScape 3 Item  
    • Jau visai apie jį buvau pamiršęs ir kaip greitai bėga laikas ką?  
    • Sekanti svarbiausios 4X Firaxis strategijos reinkarnacija. Numatoma išleidimo data 2025 metai. Pagrindinė platforma PC (bet bus ir PS5. SEriesX/S, Switch, ir greičiausiai po kurio laiko IOS) . Daugiau žinių numatoma šių metų rugpjūtį. P. S. Nežmoniškai laukiu Civilizacijos tęsinio. Asmeniškai man vienas iš "Greatest games ever" ir svarbiusias PC žaidimas. Cool😎
    • Šitas geras, palaikau. Mano tema.
  • 32 Dizainas

    1. 1. Ar patinka naujasis PlayManija.lt dizainas?


      • Taip
      • Ne
    2. 2. Kurį dizainą nuo šiol naudosite?


      • PlayManija.lt 4.0
      • PlayManija.lt 3.5 Reboot
      • RetroManija
      • Laukiu PlayManija.lt 4.0 „dark mode“

  • Naujausios viktorinos